PFB3-20SW-PJT-SH1(A) 晰写速CCS图像处理光源灯箱PFB3(A)系列
LED发光颜色White相关色温5,700 K typ.外观尺寸W 70 mm x D 150 mm x H 100 mm(not including connectors, knobs, legs, and other projections)Please refer to the "Dimensions" tab for light guide adapter dimens
| LED发光颜色 | White |
|---|---|
| 相关色温 | 5,700 K typ. |
| 外观尺寸 | W 70 mm x D 150 mm x H 100 mm (not including connectors, knobs, legs, and other projections) Please refer to the "Dimensions" tab for light guide adapter dimensions chart. |
| 通道数 | 1 channel |
| 发光方式 | 常时发光 |
| 驱动方式 | Constant-current system |
| 调光方式 | 可变电流控制 |
| 输入电压 | 24 VDC (rated) 21.6 to 26.4 VDC (range) |
| 消耗功率 | 18 W typ. |
| 绝缘耐压・绝缘电阻(输入-FG) | Insulation resistance: 500 VDC, 1M Ω min. Withstanding voltage: 250 VAC for one minute, cutoff current: 10 mA |
| 外壳材质 | Aluminum alloy |
| 调光 | Manual Continuous control using the intensity control knob Remote Light intensity can be controlled in 256 steps using the 8-bit light control signals from an external source. Note: The light intensity of this product is very faint when the intensity control knob is set to the minimum intensity. Using the Remote/Manual switch on the front panel |
| 错误检测显示 | An error indicator lamp on the front panel flashes (0.5 sec) and output stops |
| 使用温湿度 | Temperature: 0 to 40℃, Humidity: 25 to 85%RH (No condensation) |
| 保存温湿度 | Temperature: -20 to 60 ℃, Humidity: 20 % to 85 %RH (with no condensation) |
| 冷却方式 | Forced air cooling, Intake vents: sides, Exhaust vents: rear |
| 输入端口 | DC jack for power supply, Terminal block for power supply, External Control connector (15-pin D-sub) |
| 适合规格 | CE, UKCA, RoHS, IEC 62471（Low risk） |
| 重量 | 1,200 g max. |
| 附属品 | 使用说明书 |
| 注意事项 | Be sure to confirm the specifications of the light guide before use. |