FM-206 烙铁 工作台HAKKO白光 电烙铁 焊接拆焊
SpecificationsModel No.FM-206Power consumption410 W (Max.)Temperature rangeFM-2026/2027 : 200 to 450℃FM-2022/2023 : 200 to 400℃FM-2024 : 350 to 450℃FM-2029 : 100 to 550℃FM-2030 : 200 to 500℃FM-2031 :
Specifications
| Model No. | FM-206 |
|---|---|
| Power consumption | 410 W (Max.) |
| Temperature range | FM-2026/2027 : 200 to 450℃ FM-2022/2023 : 200 to 400℃ FM-2024 : 350 to 450℃ FM-2029 : 100 to 550℃ FM-2030 : 200 to 500℃ FM-2031 : 200 to 500℃ FM-2032 : 200 to 450℃ |
| Temperature stability | ±5℃at idle temperature |
Station
| Output voltage | AC 24 V |
|---|---|
| Vacuum generator | Vacuum pump, cylinder type |
| Vacuum pressure | 80 kPa (600 mmHg) (Max.) |
| Suction flow | 14 L/min. |
| Air flow | 6 L/min. (Max.) |
| Dimensions | 162 (W) × 136 (H) × 245 (D) mm |
| Weight | 6.2 kg |
Soldering Iron
| Power consumption | 70 W (24 V) |
|---|---|
| Tip to ground resistance | ＜2 Ω |
| Tip to ground potential | ＜2 mV |
| Heating element | Composite heater |
| Cord length | 1.2 m |
| Total length | 188 mm (with T12-D24 tip) |
| Weight | 30 g (with T12-D24 tip) |
Desoldering Tool
| Power consumption | 70 W (24 V) |
|---|---|
| Nozzle to ground resistance | ＜2 Ω |
| Nozzle to ground potential | ＜2 mV |
| Heating element | Composite heater |
| Cord length | 1.2 m |
| Total length | 180 mm (with N1-10 nozzle) |
| Weight | 65 g (with N1-10 nozzle) |
Handpiece (Hot air) : for FM-206
| Power consumption | 140 W (24 V) |
|---|---|
| Nozzle to ground resistance | ＜2 Ω |
| Nozzle to ground potential | ＜2 mV |
| Heating element | Composite heater |
| Cord length | 1.2 m |
| Total length | 232 mm (with N4-02 nozzle) |
| Weight | 50 g (with N4-02 nozzle) |
Total length and weight are measured without cord.
Total length and weight for handpiece (Hot air) are measured without cord and tube.