HU-100 HU-101 自动焊接系统/自动焊接机器人 HAKKO白光焊接拆焊
SpecificationsTable-top type robotPower consumption290 WStrokeX axis : 400 mmY axis : 400 mmZ axis : 150 mmθ axis : ±200 degreesPayload capacityX axis : 20 kg (jig table)SpeedX/Y axis : 1 to 800 mm/se
Specifications
Total length and weight are measured without cord. Weight of feeder unit is the maximum value which is measured with solder feed pulley unit, solder feed guide and fluoroplastic tube. Total length and weight are measured without cord. FU-6002 L type is attached as standard.Table-top type robot
Power consumption 290 W Stroke X axis : 400 mm
Y axis : 400 mm
Z axis : 150 mm
θ axis : ±200 degreesPayload capacity X axis : 20 kg (jig table) Speed X/Y axis : 1 to 800 mm/sec. Z axis : 1 to 400 mm/sec.
θ axis : 1 to 600 degrees/sec.Positioning repeatability X/Y/Z axis : ±0.02 mm, θ axis : ±0.01 degree Motor type Stepping motor Number of program 10 programs
Max. 240 points/programNumber of soldering condition 100 conditions for PS (Point soldering) mode
100 conditions for DS (Drag soldering) modeSoldering tip TX1 : 140 W, TX2 : 300 W Air Not required Operating environment Ambient temperature/humidity range 0 to 40℃,
85% or less RH (without condensation)Dimensions 601 (W) × 934 (H) × 747 (D) mm Weight 50 kg Programming software
Compatible OS Windows 7、Windows 8/8.1、Windows 10 Computer and compatible keyboard Personal computer which runs on Windows OS
and its compatible keyboardMedia reading drive CD-ROM drive Supported robot Exclusive for TTA-A4 series robot made by IAI USB port Necessary to run Easy programming software Note * Multiple connection methods between table-top type robot (IAI-made TTA-A4 series) and PC are available.
However, when connecting to PC from the USB connector on the front side of the table-top type robot (IAI-made TTA-A4 series), it cannot be used under Windows 10 environment.
* The specification of the robot is HAKKO original.
Please contact HAKKO when necessary.Solder feed unit
Model No. FU-500 Power consumption 35 W Station
Usable solder diameter 0.3, 0.5, 0.6 (0.65), 0.8, 1.0, 1.2, 1.6 mm dia. Dimensions 145 (W) × 100 (H) × 230 (D) mm Weight 2.3 kg Feeder unit
Weight 800 g Soldering iron unit
Model No. FU-601 Power consumption 140 W / 300 W Temperature range 50 to 500℃ Temperature stability ±5 at idle temperature Station
Output power AC 29 V Dimensions 145 (W) × 107 (H) × 211 (D) mm Weight 4 kg Soldering Iron
Power consumption 260 W (29V) Tip to ground resistance ＜2 Ω Tip to ground potential ＜2 mV Cord length 5 m Total length 168 mm (with TX2-XD4 tip, dimension can be adjusted within a ±5 mm range.) Weight 134 g (with TX2-XD4 tip)
173 g (with TX2-XD4 tip and iron unit fixing assembly)